Ge ic697alg230 is an analog input basic converter module designed for GE Fanuc 90-70 series programmable logic controller (PLC). It is the interface between analog sensors and PLC digital world, allowing you to integrate various analog signals into the control system.
Main functions:
Input type: Analog – accept voltage (0-10V) or current loop (4-20mA) signals from analog sensors such as temperature sensor, pressure sensor or flowmeter.
Number of channels: 8- provide 8 independent analog input channels for connecting multiple sensors at the same time.
Resolution: 14 bit (basic) oversampling – converts analog signals to 14 bit resolution digital data. Oversampling technology can further improve the resolution to improve the accuracy.
Input protection: prevent transient and steady-state overvoltage conditions and protect the module from electrical damage.
User configurable i/o reference: allows configuration of a single input channel through software without jumper or dip switch.

Product Guarantee:

E ic695cmm002 is a 2-port serial communication module designed for use with GE Fanuc RX3i PACSystems PLC. It provides two independent serial ports, which can be configured for RS-232, RS-485 or RS-422 communication, allowing PLC to connect to various serial devices and networks.
Main functions:
Two independent serial ports: support two independent serial ports for connecting various serial devices, including sensors, actuators, PLC and HMI panels.
Configurable port type: each port can be configured for RS-232, RS-485 or RS-422 communication, providing flexibility to match the communication protocol of the connected equipment.
Selectable baud rate: support RS-232 baud rate from 300 baud to 19.2 KBD and rs-485/rs-422 baud rate up to 115.2 KBD to meet different communication requirements.

Product brand:

The following are our main business brands:
Foxboro: I/A Series system, FBM full series (field input/output modules)
/Output signal processing, data communication and processing, etc. Sequential control, trapezoidal logic control, accident memory processing, analog-to-digital conversion, input
EMERSON: Spare parts for 1C31 series DCS system, CPU, OVATION system, WDPF system, WEStation system.
Triconex: A redundant fault-tolerant control system, a modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Emerson: Various spare parts such as modules, cards, drives, etc.
XYCOM: XVME series
Bently: 3500/3300 system.
Rockwell: ICS system.
ABB: PM full series DCS system, IGCT high-voltage frequency converter series, industrial robot spare parts DSQC series, INFI 90, etc.
Bailey: BRC series DCS system, etc.
Allen Bradley: 1756, 1785, 1771, 1746 full series systems, etc.
Yokogawa: CP series, etc.
Honeywell: TK/TC/CC systems, etc.
Reliance: 57C series, etc.
Schneider: 140 series processors, control cards, power modules, etc.
Modicon: AS series PLC system spare parts.
Siemens: 6ES5/6ES7414/6ES7415/6ES7416 series PLC system spare parts
Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
XYCOM: I/O, VME board, and processor, etc.
GE (General Electric): IC698/IC697 full series of PLC systems, modules, cards, drives and other spare parts.
Yaskawa: servo controller, servo motor, servo driver.
Bosch Rexroth: Indramat, I/O modules, PLC controllers, drive modules, etc.
Woodward: SPC valve position controller, PEAK150 digital controller.
We have all released products, please feel free to inquire.